AquaVor Instructions for Easy Feeding Can
AquaVor’s
Easy Feeder makes it Safe and Easy to correctly apply any of your
favorite brands of fertilizers and lawn and garden chemicals.
AquaVor
recommends AquaVor brand plant foods because they are designed
specifically for your Easy Feeder to deliver complete and balanced
nutrition every time you water just like the commercial growers do.
OR
you can use your AquaVor Easy Feeder with any concentrated liquid
fertilizer, weed killer, pesticide, fungicide, animal repellents or any
other liquid concentrated lawn and garden product by following these
instructions.
Mixing Suggestions:
Since
we will be feeding more frequently with our new “Easy Feeder”, we
recommend that when using any fertilizer with an NPK higher than
10-10-10, you should use it at half strength to avoid burning due to
the high urea nitrogen content.
Using a permanent marker, write the contents of the product in the space provided on the Easy Feeder Bottle.
Be sure to also record any important mixing or usage date information.
Liquid Fertilizer Or Any Other Concentrated Liquid Lawn And Garden Product:
For
even distribution and proper application flip the AquaVor Easy Feeder
Can’s dual Rosette firmly closed into the rain spout position. For
indoor plants use the open spout end.
Using
a funnel, fill the bottle half way with concentrate and then the rest
with water to make a weaker fertilizer solution if desired.
Install
the pump and use one to two pumps to prime (One pump = one teaspoon /
Six pumps = one ounce). Determine the mix ratio according to the
particular manufacturer’s instructions. The 1 Gallon and 1.5 Gallon markers on the Easy Feeder makes it simple to fill with the right amount of water.
Storage of Your AquaVor Easy Feeder:
Be sure to rinse out the reservoir of the Easy Feeder completely.
If
you want to keep any leftover mixture in the bottle of your AquaVor
Easy Feeder, leave it snapped in place and store Easy Feeder in an
upright position until the next time you water.
For
Storage of additional Easy Feeder Bottles just remove the bottle from
the can. Depress the pump and dispense remaining contents in the pump
chamber either back into the can or bottle or sink.
Hold
pump in downward position while turning clockwise until firmly locked
and return the empty pump cap to the bottle and securely tighten.
Always be sure to keep any fertilizers or chemicals clearly marked and well out of reach of children.